If you want to buy a better elevator nylon wheel, you must first choose a good manufacturer is the key. Shopping around is a particularly important item for choosing high-quality nylon wheels. You can buy a satisfactory product if you make more comparisons.
After the buyer has made a comparison, we should choose our favorite nylon wheel. Buying a high-quality nylon wheel can bring us a different experience and bring us more convenience.
At present, it is known that the practical application of nylon wheels is characterized in that the lower end of the protective shell is fixedly installed at the four corners, and the rear center of the position support block is rotatably installed on the shaft. The current application The nylon wheel of the geared motor and the application equipment are used for the nylon wheel of the geared motor of the current machine building block, and the time for cleaning the nylon wheel is reduced.
The step of adjusting the nylon wheel is to strengthen the external force to ensure that the coil will not be deformed. The application of nylon, because the complex part of the nylon coil is asymmetrical with the left and right sides and the cavity. If the contraction is not uniform, the nylon coil can pass the external force, so The size of the module is balanced and contracted to obtain the desired external dimensions. The flame retardant is easy to decompose at high temperature, releasing acidic and metal corrosive substances, so hard chromium treatment is required. In terms of process, try to control the barrel temperature as much as possible Not too high.
It is known that new nylon wheels include a movable template, a movable mold for the clamping plate and a support plate, a movable mold for the cushion and seat plate, and a movable template center from top to bottom, a mold with an inverted cone shape. The cavity block type helical gear is set in the hole. At present, it can be demoulded by rotating the double-cylinder nylon wheel with the same or opposite rotation direction. The lower sleeve has the function of thermal insulation, and the surrounding injection molding temperature has insulation, which reduces It has a certain effect on the gap of the phenomenon that occurs in the injection of the center gear and improves the rate of qualified products.
Nowadays, when using nylon wheels, you must pay attention to strictly controlling the temperature of the barrel. If the melting temperature is too high, the product will fade due to degradation. If the temperature is too low, the transparency of the product will be affected by bad plasticization. The temperature of the mold It should be as low as possible, and the high temperature of the mold will be reduced. Due to the transparency of the product caused by crystallization, it will affect the cutting and wear parts during molding. Therefore, a combination of applications with high feed capacity and high wear resistance must be used.
