The cast steel nylon wheel is engaged with the upper half ring and the lower half ring of the roller by the special-shaped bump and the special-shaped groove, and the development of the cast steel nylon wheel is more specialized to the same Special industry.
The user is responsible for the correct operation and maintenance of the manual material transport equipment used. The cast steel nylon wheel manufacturer will cause some products to be easily damaged if the operation is wrong, and the correct use of the product and effective maintenance will enable the cast steel. The nylon wheel has a big effect. When the cast steel elevator nylon wheel has partial friction damage, only the upper half ring and/or the lower half ring body are removed and replaced, there is no need to replace the bushing, saving resources, and the design is customized.
When using nylon casters, it is desirable to consider in advance how they are used, the functions required, the conditions of use (the range of use), and then the appropriate type. It is necessary to pay attention to the following matters: Firstly, the appropriate load-bearing load, the load-bearing load of the product analysis refers to the basic load-bearing that is easy to move when transported on a flat ground by manual operation, and is capable of continuously carrying out such handling work under a safe state. For normal loads, the total weight of the carrying item needs to be estimated beforehand, and then the appropriate cast steel nylon wheel is selected according to the permitted load. The cast steel nylon wheel has better toughness and wear resistance, lighter weight, easy installation, extended service life, and the groove has a protective effect on the steel wire rope. Spray or projectile derusting (also known as sandblasting and rust removal). Usually with oil-free compressed air (or high pressure water). Chemical descaling (also known as pickling and rust removal). It is mainly used to brush (spray) with an inorganic dilute acid solution, soaking a surface with a rusted metal surface and achieving the purpose of derusting. The rust remover removes rust. The key is to remove or remove the rust on the metal surface by chemical reaction by brushing or soaking it on a rusted metal surface with a weakly acidic chemical liquid (ie, a rust remover).
Inspection method for cast steel nylon wheel:
To check the traditional nylon wheel of cast steel, it is necessary to check the driving condition of the cast steel nylon wheel. The driving condition of the cast steel nylon wheel directly reflects the quality of the dead angle. When driving a cast steel nylon wheel, if there is abnormal noise, there should be a large friction at the joint. If there is vibration, the bearing appears to be a problem. If there is a resistance, then there should be no foreign matter entanglement between the shafts.
Check the frictional damage of the caster nylon wheel. The severity of the tire surface can reflect the environmental conditions of the place of use, such as whether the ground has sharp substances or iron wire ropes. If necessary, it can be placed for the cast steel nylon wheel. Bearing sleeve.
Often, only three of the four nylon casters are subjected to pressure. When using cast steel nylon wheels of different sizes, use a nylon caster with a low load-bearing load as the reference to calculate the three-dimensional large load-bearing weight. . Regarding the speed, the requirement for the speed of the nylon caster is: in the normal temperature environment, the basic use condition of a certain stop working state is not only less than the walking speed, but also on the flat ground. The company has a complete set of advanced cast steel nylon wheel production equipment and international leading industrial manufacturing technology. Because the cast steel nylon wheel has excellent performances such as non-toxic, light weight and wear resistance, it is widely used to replace copper and other metals in machinery, chemicals and instruments. , automotive and other industrial applications.
